• Heavy-Duty Build: Commercial-grade steel construction designed to handle massive weight loads effortlessly.
• Storage Capacity: Holds up to 10 pairs (20 total) of standard heavy dumbbells.
• Ultra-Compact Footprint: Takes up only 55cm × 56cm of floor space while standing 155cm tall.
• Weights：24kg/26kg.
• Handle Requirement: Dumbbell handle length must be 13cm or greater to fit securely.
• Auckland Local: Pick up today at our Wairau Valley Showroom, or get fast NZ-wide delivery.

Commercial Strength, Minimal Footprint

The GravoMax Heavy-Duty 10-Pair Vertical Dumbbell Rack is the ultimate storage solution for serious lifting facilities and premium garage gyms. First, storing heavy dumbbells on standard consumer racks often leads to wobbling and frame warping over time. Next, horizontal racks consume massive amounts of your valuable floor space. Since we engineered this vertical tower with thick, heavy-duty steel and an anti-tip base, it instantly solves both problems, securely holding your heaviest iron in a tiny 55cm × 56cm corner.

We designed this 155cm tall rack with intelligent, graduated peg spacing to prevent large dumbbell heads from colliding. For instance, the gap starts at a compact 12cm at the top and widens to 19cm at the bottom for your largest weights. Consequently, the heavy-duty, wide-stance base ensures the tower remains completely locked to the floor as you aggressively rack and unrack your gear daily.

Please note that this specific tower features a heavy-duty, commercial-grade build designed for massive weight sets. If you are outfitting a standard home gym and need a lighter, more standard option, please check out our Home-Use 10-Pair Dumbbell Stand →.

Please measure your dumbbells before purchasing. To sit securely on this heavy-duty rack, your dumbbells must have an inner handle length of at least 13cm. Dumbbells with shorter handles (less than 13cm) will not bridge the gap between the two uprights safely.

Key Design Features

• Heavy-Duty Construction: Built from reinforced steel to safely support the massive combined weight of 20 heavy dumbbells without bending.
• Vertical Space-Saver: Transforms a sprawling dumbbell collection into a sleek, freestanding tower that fits in any corner.
• Ergonomic Access: The 155cm height allows you to grab your lighter warm-up weights at chest height to reduce lower back strain.
• Graduated Slots: Precision-cut slots widen towards the bottom. As a result, the bulky heads of your heavier dumbbells won’t crash into each other.

Technical Specifications

Frequently Asked Questions (FAQ)

• Capacity Options: Available in 6-Bar (935mm height) and 9-Bar (1360mm height) configurations.
• Heavy-Duty Build: Constructed from 5mm thick, one-piece bent premium steel.
• Ultimate Protection: Features 6mm thick cushioning pads to protect your barbell knurling and finish.
• Custom Width: Install the two brackets at any distance to fit your specific barbell lengths perfectly.
• Hardware Included: Comes with heavy-duty expansion bolts for secure wall mounting.
• Best for: Commercial facilities, CrossFit boxes, and premium garage gyms with multiple bars.

Clear Your Floor, Protect Your Barbells

The GravoMax Horizontal Wall-Mounted Barbell Rack is the ultimate space-saving solution for any serious training facility. First, leaning barbells against a wall or leaving them in a corner damages their sleeves and creates a massive tripping hazard. Next, vertical storage tubes are not always ideal if your gym has low ceilings. Since this horizontal rack mounts directly to your wall, it instantly clears your floor space while keeping your entire barbell collection highly visible and easily accessible.

We engineered this rack strictly for heavy-duty commercial use. For instance, the frame is crafted from 5mm thick, one-piece bent steel, ensuring it will never warp under the weight of multiple heavy barbells. Furthermore, the two independent brackets allow you to completely customize the installation width. Consequently, whether you are storing standard 2.2m Olympic bars, shorter women’s bars, or specialized curl bars, you can set the perfect spacing for your specific needs.

Key Design Features

• 6mm Cushioning Pads: Every single slot is lined with a 6mm thick soft pad. As a result, the rack will never scratch the cerakote, zinc, or chrome finish of your expensive barbells.
• One-Piece Bent Steel: The 5mm thick steel plate is bent from a single piece rather than welded at weak points. Therefore, it offers significantly higher structural integrity and load-bearing capacity.
• Adjustable Installation Depth: Because the rack consists of two separate uprights, you can mount them at the exact distance required for your gym’s wall studs and your bar lengths.
• Secure Wall Anchoring: We include professional-grade expansion bolts in the box. Consequently, you can securely mount the rack to concrete or block walls right away.

Technical Specifications

Frequently Asked Questions (FAQ)

• Compatibility: Designed exclusively for 50mm Olympic-sized weight plates.
• Storage Capacity: Features 6 weight pegs (20cm length) to hold a full plate set.
• Barbell Holders: Includes 4 vertical 50mm tubes to safely store your Olympic barbells.
• Package Details：120 x 22 x 14cm/18kg
• Footprint: Compact 60cm × 64cm base saves valuable floor space.
• Design: Stationary, heavy-duty base for maximum stability under heavy loads.
• Best for: Keeping home gyms and commercial facilities safe and organized.

Maximize Your Floor Space

The GravoMax Stationary Olympic Weight Tree is the ultimate solution for a cluttered workout space. First, leaving heavy bumper plates and barbells scattered on the floor not only damages your equipment but also creates dangerous tripping hazards. Next, finding the right plates mid-workout breaks your focus. Since we engineered this storage tree with 6 dedicated pegs and dual barbell holders, it instantly transforms your messy garage or studio into a highly professional, organized lifting zone.

We designed this specific model for rock-solid stability. For instance, the 60cm × 64cm base ensures the rack will not tip over, even when fully loaded with heavy iron. Furthermore, the generous 40cm spacing between the upper, middle, and lower pegs means you can comfortably store full-size (450mm diameter) bumper plates without them overlapping. Consequently, it is the perfect heavy-duty, freestanding storage hub for any serious lifter.

Key Storage Features

• Exclusive 50mm Compatibility: The pegs and vertical tubes are precisely measured for Olympic gear. As a result, your plates and bars slide on smoothly and sit perfectly secure.
• Optimal Peg Spacing: Features 40cm clearance between tiers. Furthermore, this generous gap allows you to store large Olympic bumper plates on multiple levels easily.
• Dual Barbell Storage: The base includes two 15cm deep vertical tubes. Because of this, you can store your 15KG or 20KG barbells upright, protecting their sleeves and saving massive space.
• Anti-Tip Base: The heavy-duty steel frame utilizes a wide stance footprint. Consequently, the tree remains completely stationary and safe during loading and unloading.

Technical Specifications

Frequently Asked Questions (FAQ)

• Compact Profile: Features a 16cm usable loading space. Therefore, it is perfect for fractional change plates.
• Safety Bumper: Equipped with a thick 2cm heavy-duty rubber pad. As a result, it protects your rack uprights from metal impact.
• Exclusive Fit: Tailored specifically for GravoMax GM Series power racks. However, you must check your hole size for other brands.
• Smooth Coating: Built with a premium rust-resistant finish. Consequently, loading and unloading plates is completely effortless.
• Auckland Local: Pick it up today at our Wairau Valley Showroom, or get fast NZ-wide delivery.

About GravoMax GM Series Plate Storage Post 03

The GravoMax GM Series Plate Storage Post 03 is an incredibly compact and practical accessory for gym organization. First, scattered weight plates on the floor create dangerous tripping hazards. Next, long storage pins often get in the way of your wide-stance squats or bench press movements. Since this 03 model utilizes a short 18cm total length, it gives you a practical storage solution without wasting valuable space. Thus, it is the perfect choice for optimizing your lifting station footprint.

Compatibility and safety are vital for professional gym setups. Therefore, we engineered this post specifically to match the hole patterns of our premium GM Series racks. For instance, it bolts directly into the steel frame without sliding or rotating. Furthermore, the built-in 2cm rubber bumper absorbs heavy shock and prevents metal-on-metal scratches. Consequently, your power rack stays protected, and your lifting environment remains quiet and professional.

Key Performance Features

• Optimized Short Sleeve: The 16cm usable length is excellent for tight spots. Because of this, it holds change plates easily without protruding into your workout zone.
• Heavy-Duty Rubber Pad: The thick 2cm bumper acts as a robust shield. Furthermore, it cushions the plates cleanly during fast-paced loading sessions.
• Secure Bolt-On System: Attaches directly through the rack upright with a high-strength bolt. Consequently, it will never sag or loosen under heavy load.
• Rust-Resistant Coating: The smooth outer finish repels moisture and sweat. As a result, your Olympic plate collars slide on and off smoothly for years.

Technical Specifications

Frequently Asked Questions (FAQ)

• Two Size Options: Choose between a long model for bands or a short model for ropes. Therefore, you get the exact storage you need.
• Space Saving: Mounts flush against your wall. As a result, it clears messy accessories off your gym floor instantly.
• Secure Storage: Every prong features an upward-angled lip. Because of this, your gear will never slide off accidentally.
• Heavy-Duty Steel: Built from solid metal with a tough powder coat. Consequently, it handles heavy lifting belts easily.
• Auckland Local: Pick it up today at our Wairau Valley Showroom, or get fast NZ-wide delivery.

About GravoMax Wall Mount Skipping Rope & Resistance Band Hanger

The GravoMax Wall Mount Accessory Hanger keeps your training space perfectly organized. First, tangled jump ropes and resistance bands create dangerous tripping hazards on the floor. Next, searching for the right accessory wastes valuable workout time. Since this heavy-duty steel rack displays all your gear neatly on the wall, you can find everything instantly. Thus, it is an essential upgrade for maintaining a clean, professional home or commercial gym.

We engineered two distinct variations to match your specific equipment. For instance, the Long Model features deep 27cm prongs with wide 4.3cm gaps. This size holds thick resistance bands and heavy lifting chains perfectly. Conversely, the Short Model utilizes 12.5cm prongs with tight 2cm gaps. Therefore, it secures thin speed ropes and small cable attachments without them slipping through. Consequently, you can customize your storage setup exactly how you want it.

Key Performance Features

• Laser-Cut Design: Features the bold GravoMax logo cut directly into the steel backplate. As a result, it adds a premium aesthetic to your facility.
• Matte Powder Coat: The thick black finish protects the steel from rust. Furthermore, it prevents metal cable attachments from scratching the surface.
• Angled Safety Lips: The very end of each prong bends sharply upward. Consequently, bundled resistance bands will not slide off the front.
• Universal 57cm Length: Both models share the exact same 57cm width. Because of this, you can mount them side-by-side for a seamless, clean look.

Technical Specifications

Frequently Asked Questions (FAQ)

• Max Load: Holds up to 600kg.
• Dimensions: 1215mm (L) × 396mm (W).
• Slot Design: Multiple widths from 114mm to 228mm.
• Floor Protection: Features shock-absorbing rubber pads.
• Auckland Local: Pick it up today at our Wairau Valley Showroom, or get nationwide delivery.

Heavy-Duty Storage for Plates

The GravoMax Bumper Plate Storage Rack is the ultimate organization tool. First, the horizontal floor design provides unmatched stability. Next, the massive 600kg capacity holds all your heavy competition plates easily. Since it uses heavy-duty steel, the rack never bends under extreme loads. Yet, it remains very easy to maneuver. Thus, it is essential for both home garages and commercial gyms.

We added smart protection features to this storage rack. For instance, the base includes thick shock-absorbing rubber pads. Furthermore, this prevents any dangerous sliding and protects your floor from scratches. Consequently, you can focus entirely on your workout. In addition, the 12mm solid steel dividers ensure incredible long-term durability.

Core Design Advantages

• Multiple Slots: To begin with, the calculated spacing fits both thin iron and thick bumper plates perfectly.
• Floor Protection: Secondly, the rubber base pads deliver excellent grip and scratch resistance.
• Easy Mobility: Finally, the strong front handle makes adjusting the rack position effortless.

Technical Specifications

Frequently Asked Questions (FAQ)

• Product: Heavy-Duty Wall Mount Bench Hanger
• Material: 5mm laser-cut premium steel
• Hardware: Expansion screws included for secure mounting
• Finish: Textured black powder-coated with laser-cut logo
• Compatibility: Perfectly fits GravoMax Flat Benches
• Best For: Home gyms, studios, and commercial floor optimisation

Space-Saving Wall Storage for Your Flat Bench

Keep your training area cleaner, safer, and more organised with the GravoMax Wall Mount Bench Hanger. First, this heavy-duty steel bracket provides a simple yet effective solution for lifting your flat bench off the floor when not in use. Therefore, it helps you make better use of valuable gym space. Whether you are setting up a compact home gym or improving a commercial training area, this hanger offers a clean, professional way to store your bench vertically against the wall.

Premium Build & Compatibility

Built from durable 5mm formed steel and finished with a textured black powder coat, the hanger features a sharp, laser-cut GravoMax logo to match your premium setup. Furthermore, this product comes complete with expansion screws for a secure installation. Please note: while it is only guaranteed to fit GravoMax Flat Benches, it may fit others—we strongly recommend checking your bench dimensions before purchase to ensure compatibility.

• Compatibility: Specifically designed to fit Quick Adjustable Dumbbells perfectly
• Structure: Two-tier steel shelf design provides extremely stable storage
• Organization: Middle rail features dedicated, numbered slots for handles and accessories
• Durability: Heavy-duty powder-coated steel frame weighing a solid 23 KG
• Auckland Local: Pick it up today at our Wairau Valley Showroom.

A Solid Home for Your Heavy Weights

You will love the GravoMax Adjustable Dumbbell Stand because it gives your heavy weights a solid, highly organized home. First, picking up heavy dumbbells repeatedly from the floor can severely strain your lower back. Therefore, this compact stand keeps your dumbbells at a highly practical, ergonomic pick-up height. As a result, you can transition between sets much faster and significantly reduce your risk of injury.

Furthermore, this stand is meticulously engineered to keep your home or studio setup incredibly clean. Because it utilizes a two-tier steel shelf design, it provides unwavering stability for heavy loads. Also, the clever middle rail includes dedicated, numbered slots specifically for your dumbbell handles and accessories. Thus, everything stays totally tidy and exceptionally easy to grab during high-intensity training. To explore more ways to organize your gym, check out our full range in the Weightlifting Storage Collection.

Why It Works

• Ergonomic Height: First, the 60cm height perfectly minimizes lower back fatigue when racking and un-racking weights.
• Smart Storage: Second, the dedicated numbered slots prevent your accessories from getting lost on the gym floor.
• Industrial Build: Finally, the 23KG gross weight guarantees the powder-coated steel frame will never tip over under maximum load.

Technical Specifications